What's new

IESDesk changes every week. Here is every release, newest first.

Live now: version 1.5.21, released . 69 releases since 28 September 2026. Follow them with the Atom feed.

On this page

Version 1.5.21 Live now

New

  • Lighting Scenes: a Street pole has an arm. The new Arm length setting puts the light source over the road, and the 3D scene draws the pole and its arm.
  • Lighting Scenes: with the International (CIE) standard a Street offers every dry road surface of CIE 144: C1 and C2, R1 to R4 and N1 to N4.
  • Lighting Scenes, IES View, LDT View and Compare: Room and Corridor scenes get the Isolux and Grid buttons, with lines on the floor, the walls, the ceiling and the calculation plane.

Improved

  • Lighting Scenes: a dropped or chosen file opens the scene at once, and a change of the Standard or the Unit applies at once.
  • IES View, LDT View and Compare: the Scene section shows the same settings as Lighting Scenes. Stairs turns the light by itself so its strongest side lights the treads.
  • Lighting Scenes: on a wide screen the full-screen scene puts the settings on the right, folds the figures into a panel and shows one short hint line.
  • Docs: the Lighting Scenes guide says the scene engines pass the CIE 171 test cases for a room with luminaires.

Version 1.5.20

New

  • Lighting Scenes: Street road luminance gives more of its standard. With the International (CIE) standard you get the edge illumination ratio REI of EN 13201-3 and, with the new Wet road surface setting (W1 to W4), the wet-road uniformity. With North America (IES) you get the veiling luminance ratio of ANSI/IES RP-8-25. The lighting classes check these values.

Improved

  • Docs: the guides describe the full-screen scenes, the International · lux and North America · fc switch and the new View, with new pictures.
  • Lighting Scenes and every 3D view: in the full-screen scene the figures, warnings and Find an even layout answer fit the panel at 1440px without a scroll, the Settings name stays at the top while the settings scroll, and a lighting class or emergency check shows its value and limit on one line. False colour shows on a grey stage.

Fixed

  • Lighting Scenes: in the full-screen settings panel the ceiling, wall and floor reflectance sliders no longer overlap at 1280px.
  • LDT View and Compare: an LDT file that writes its wattage with a decimal comma (15,6) opens with its figures and no power, instead of an error.

Version 1.5.19

New

  • Lighting Scenes: Room, Corridor and Find an even layout count the light that the room reflects. You set the reflectance of the ceiling, the walls and the floor from 0 to 90%, and the figures add an Of which direct row.

Improved

  • Lighting Scenes and the View result page: on a wide screen the scene fills the screen. The scenes sit in one row of icons at the top, the settings in a panel on the left and the figures in a panel on the right. The page head switches between International · lux and North America · fc, and the Standard and unit button sets them on their own.
  • IES View and LDT View: the diagram field reads Isolux mounting height, as on the Diagram page.

Version 1.5.18

New

  • Lighting Scenes, IES View, LDT View and Compare: Corridor and Open area with one luminaire can check emergency lighting. With the International (CIE) standard you get the EN 1838:2024 verdict for an escape route or an open area, and with North America (IES) a check against the NFPA 101 values of an egress path. You can set the emergency light output from 1 to 100%.
  • Lighting Scenes, IES View, LDT View and Compare: Street and Bollards take a lighting class: the M, C and P classes of EN 13201-2 with the International (CIE) standard, or the streets and walkways of ANSI/IES RP-8-25 with North America (IES). The page shows each value of the class beside the figure, with a verdict.
  • Lighting Scenes: in Room, a luminaire that sends 10% or more of its light up hangs 0.8 m below the ceiling, and the page adds Ceiling figures. The new Suspension length setting changes how far it hangs.

Improved

  • IES View and LDT View open each file in a scene with the shape of the light on: Open area, or Room for a file that sends more light up than down.
  • Compare reads like View: its sections are Summary and Diagrams, and it starts as soon as it has 2 or 3 files. On a phone the Summary table fits every file on the screen.
  • Scenes: on a wide screen the controls sit at the foot of the scene, and the camera buttons show icons. Shape, Isolux and Grid show a check box, and Isolux and Grid always show their values, so the Show values button is gone.
  • IES View, LDT View, the Diagram page and report sheets: the isolux diagram fits its grid to the light, so a narrow downlight shows rings that read and a wide road light is no longer cut at the edge.
  • BUG Rating, ULOR and the BUG, ULOR and UGR section of View list their figures in a table, one row each, as the Summary of View does.

Fixed

  • Compare: a comparison that is not saved no longer shows an Open in View link that opened an empty page.

Version 1.5.17

New

  • Lighting Scenes: Street now shows the road luminance in cd/m² for a dry road of the surface you choose (R1 to R4), with its uniformity and, for the International (CIE) standard, the threshold increment TI.

Improved

  • Lighting Scenes, IES View, LDT View and Compare: Standard and Unit sit in the top bar and apply at once, and on a phone the scene settings start folded so the scene shows on the first screen.
  • The Standard choice now reads International (CIE) and North America (IES).
  • On Compare, every scene has Shape, Isolux, Grid and Real light or False colour, and one press changes every scene.
  • The scenes of Lighting Scenes, View and Compare turn slowly by themselves when they open, and a new Turn button starts and stops the turn.

Fixed

  • Scenes: lengths in feet read with one decimal, the sliders stay in line when a label wraps, and on a phone the stage buttons no longer cover the 3D picture.

Version 1.5.16

Improved

  • Lighting Scenes: the scene now takes the full width. Its settings sit above it as sliders and one-click choices, and Front, Side, Top, Reset and Full sit on the scene itself.
  • IES View, LDT View and Compare: the 3D view and the scenes have the same controls on the stage, and the scenes in View and Compare include Stairs.
  • IES View and LDT View: the diagrams redraw by themselves when you change the mounting height or Cone and Beam.

Fixed

  • IES View and LDT View: a click on a section link above the result no longer clears the result.

Version 1.5.15

New

  • Metrics CSV: send up to 100 IES or LDT files from Your files and get one CSV with a row for each file: BUG, zone lumens, total lumens, efficacy, efficiency, uplight, beam and field angles, NEMA and road types.

Improved

  • IES View and LDT View show the result faster, without waiting for the server.

Version 1.5.14

Improved

  • What's new now explains which luminaires the UGR Table calculates by CIE 190 and which keep the CIE 117 method.

Version 1.5.13

New

  • The UGR Table now calculates by CIE 190 for symmetric luminaires, whose light spreads evenly in every direction, with the room values worked out from the room's own dimensions. Asymmetric luminaires, such as wall washers or linear wall fittings, keep the CIE 117 method, and every result shows which method it used.

Improved

  • Batch jobs and chat uploads now tell you before they start when a job does not fit your monthly file allowance, and keep the files that were already accepted.
  • Generate now records the multiplier and source of a scaled file in the file itself and warns about unusual multipliers.
  • Reports have larger diagram labels and simpler headers.

Version 1.5.12

Improved

  • UGR Table results now show the calculation method and the 2021 standard that sets the limits, and they warn when a file is relative or may be symmetric.

Version 1.5.11

Improved

  • The IESDesk visitor statistics, which use no cookies, now count completed file uploads, newsletter signups and pages that were not found, so broken links and failed steps get fixed sooner.

Version 1.5.10

Fixed

  • Chat editing tools now warn that changes replace pending edits, and that restoring original values has no redo.

Version 1.5.9

Improved

  • The footer of every page now links to IESDesk on LinkedIn and X.

Version 1.5.8

New

  • A new post on the blog: how IESDesk was built, told by its founder.

Improved

  • Each blog post shows its type, its date and its reading time, and ends with related posts.

Version 1.5.7

Improved

  • The pole layout in Lighting Scenes now works for any open area, such as a car park or a yard.
  • The terms now describe IESDesk as a released service.

Version 1.5.6

Improved

  • The home page shows lighting designers and manufacturers or labs their own way into IESDesk: the one-file tools that need no account, and the bulk tools of a free account.

Version 1.5.5

Improved

  • The privacy notice has a new Chat apps section: what IESDesk keeps when you use it from Claude or ChatGPT.

Fixed

  • The unit list in the Lighting Scenes settings shows its full text again.

Version 1.5.4

New

  • Lighting Scenes finds a pole layout for a car park: how many poles of one product it needs for an EN 12464-2 class, or for your own targets.
  • The IESDesk blog, starting with a guide to checking IES and LDT files from Claude or ChatGPT.

Improved

  • Every tool page lines up on one edge, and Docs now sits in the About menu.

Fixed

  • The IESDesk box in ChatGPT works again. It said "IESDesk did not answer" for every file.

Version 1.5.3

New

  • Docs has a step-by-step guide with pictures for each tool: View, Edit, Compare, Lighting Scenes, Diagrams, BUG Rating, ULOR, UGR Table and Report sheets.
  • Compare makes a one-page A4 PDF of the figures and the polar curves, with the files shown as Option A, B and C or with their names.
  • Every account can now add IESDesk to Claude and ChatGPT. A Free account gets 50 checks a day.

Improved

  • Compare: Overlay draws the polar curves of all files on one diagram.
  • Drop a file on BUG Rating or ULOR, and View opens at its BUG, ULOR and UGR section, with the figures, diagrams and 3D view of the file.

Version 1.5.2

Improved

  • Drop an IES or LDT file on the home page, and View opens with its figures, diagrams, 3D light distribution, BUG rating and ULOR.
  • UGR Table, right in your browser. The UGR table is now worked out on your own computer, so it appears faster, and the numbers are exactly the same as before.

Version 1.5.1

New

  • One View page opens IES and LDT files.
  • The guide Use the IESDesk API shows how to send IES and LDT files to IESDesk from your own scripts, and get the same figures, files and jobs as on the pages.
  • Lighting Scenes: choose the Standard, EN (Europe) or IES (North America). With IES, Street and Bollards use the calculation grid of ANSI/IES RP-8-25, and the figures add Average to minimum and Maximum to minimum.

Improved

  • Drop a file anywhere on the page, or choose one, and the work starts. This holds on View, Diagrams, BUG Rating, ULOR and UGR Table.
  • In Edit in your browser, choose Save to Your files while you edit, when you want to continue on another computer.
  • Lighting Scenes: a Street counts every pole within five pole heights of its area (EN 13201-3). The 3D view shows the middle three.
  • Lighting Scenes: Find an even layout gives a layout also for a large luminaire close to the walls, with the near field warning, in place of no layout.
  • Lighting Scenes: Find an even layout and the Wall uniformity say "passes with direct light alone" when a target is reached. When it is not, they do not call it a failure: reflected light may reach it, so check it in lighting design software that counts reflected light.
  • View, Compare and Lighting Scenes open their results in a wide workspace: the settings on the left, the figures in one row above the scene, and a scene that grows with the window.
  • The View result has a tool strip under the top menu: Lighting Scenes, Overview, Diagrams, Glare and uplight, Metadata. A Glare and uplight section shows the BUG rating and the ULOR of the file, and a button to calculate the UGR table.

Version 1.5.0

New

  • Edit now works in your browser. Your IES and LDT files stay on your computer, and IESDesk does not upload them. Choose Upload to Your files to continue on another computer.

Improved

  • Compare reads your files in your browser. To keep a comparison, choose Save to Your files.
  • Lighting Scenes: the minimum, average and maximum are the values at the points of the calculation grid of the standard (EN 12464-1, EN 12464-2 or EN 13201-3).

Version 1.4.1

Improved

  • Lighting Scenes: the figures of Room, Corridor and Find an even layout leave out a band of 0.5 m along the walls, as EN 12464-1 asks. The 3D view still shows the whole floor and marks the band.
  • Before you confirm an export from Claude or ChatGPT, the Confirm page lists every change it carries, with the value before and after.

Fixed

  • Your files says "Export failed" for an Edit batch whose last export failed.
  • A bulk job that failed no longer sends a completion email as well.

Version 1.4.0

New

  • In Claude and ChatGPT, the View answer now shows the polar diagram and the isolux diagram of your file as pictures.

Improved

  • API access follows your plan. Enterprise accounts can create API tokens; a Free account gets one through the API pilot. One-file API calls share a daily limit of 2,000 per account.
  • In chat, a question about how many luminaires you need uses Find an even layout.
  • IESDesk emails now come from hello@mail.iesdesk.com.

Fixed

  • When you change the mounting height unit on the Diagram, IES View and LDT View pages, the height is now converted: 6 m becomes 19.7 ft.

Version 1.3.0

New

  • Lighting Scenes has a maintenance factor. Every scene now shows maintained values, which allow for light lost to dirt and ageing. The default is 0.80. Enter 1 for the values of a new installation.

Improved

  • Find an even layout now aims for the maintained average, so it no longer proposes too few luminaires.
  • In the API, the View answer gives the beam on each side of each plane: the half-intensity edges, the beam angle and the peak angle. It adds a note when the beam leans to one side or is not round.

Fixed

  • The isolux value labels of a scene no longer overlap.

Version 1.2.0

Improved

  • The ZIP file of an Edit export now downloads through a short-lived private link, as the diagram and report ZIP files do.
  • The product news form has its own page. After you subscribe, the answer shows on that page.
  • The footer of each page shows the version of IESDesk, so a screenshot shows which version you used.

Version 1.1.0

Improved

Fixed

  • On a report sheet without a logo, the Turkish letters of your account name (ş, ğ, ı, İ) now print in bold, like the other letters.

Version 1.0.1

Fixed

  • The privacy notice and the terms show the date of their latest change.

Version 1.0.0

New

  • IESDesk is now version 1.0.0.

Improved

  • The privacy notice and the terms now state how the Generate quality check uses your files and how long it keeps them.

Version 0.38.0

New

  • With an API token, you can now upload files for Edit, change their metadata, start the export and download the ZIP.

Improved

  • New comparisons and the scene pictures show the light colour that the file states. A file that states "ww" now shows "Warm white (ww)", not "3000 K". When a file states no colour, the Wall scene of Compare says so.
  • The Edit page, the metadata sheet and Generate refuse a new invisible control character or line separator in a value.

Fixed

  • The email verification and product news confirmation buttons now work also before the page has fully loaded.
  • A change from a second tab can no longer reach an export that already started.

Version 0.37.0

Improved

  • With an API token, you can now get the results of IES View, LDT View, Lighting Scenes, and Compare as JSON.

Fixed

  • A Wall Wash request with an API token now gets its JSON answer with any Accept header.

Version 0.36.0

New

  • Add isolux lines and a distance grid to Open area, Street, Bollards, and Wall scenes, including scenes in View.

Fixed

  • View, Compare, and report sheets now show clear fallback text when a file contains figures too large to display.

Version 0.35.0

Improved

  • Every page with scene choices shows the same scene cards, with a drawing, a name and a short description. On the Lighting Scenes start page, Corridor is now one of the cards.

Version 0.34.0

Improved

  • Report sheets draw their diagrams in the Minimal style of the Diagrams page.
  • A Floodlight report sheet shows the cone diagram when the beam is round. Other floodlights show the isolux diagram at a 5 m or 15 ft setback.
  • On the Report page, choose the sheet type on the sample sheet cards.
  • On a phone, the Lighting Scenes choices scroll in one row, so the upload box sits higher. Upload buttons are easier to tap.
  • Scene warnings are clearer. Street and Open area figures say that they are not an EN 13201 or EN 12464-1 calculation.

Fixed

  • In Generate, "Rows by output format" counts only the rows that write files, and each row shows the format that it writes.
  • The Room scene no longer shows an empty "For a closer result" hint.

Version 0.33.0

New

  • Lighting Scenes has a Stairs scene. See how riser lights on a straight stair light each tread.
  • In Generate, a Format column chooses IES, LDT or both for each row. A Family column puts variant files in ZIP folders.

Improved

  • App and tool pages use the full screen width. Scene settings now sit above the result.
  • The Near field warning now shows only when a point is very close to the luminaire, based on the luminous size in its file.
  • In the 3D views, drag to rotate and scroll to zoom.

Version 0.32.0

New

  • In Lighting Scenes, turn on Shape to see the light shape at each luminaire. Reset view now sits next to the view buttons.

Improved

  • Report sheets now use standard PDF fonts, so every PDF reader shows all the letters with no font warning.
  • In Output filename, type a name without the extension. IESDesk adds .ies or .ldt to match the file.

Version 0.31.0

Improved

  • The Enterprise page now offers bulk IES and LDT generation and custom API integration.

Version 0.30.0

Improved

  • Compare 2 or 3 IES or LDT files in the same lighting scene. See their light distributions, figures and polar curves below. Each scene uses the same settings and brightness scale for every file.

Version 0.29.0

Improved

  • Lighting Scenes now shows the 3D picture and the figures for many more files. Where the picture is rough near a sharp beam edge, a "Simplified picture" badge and the point readings say how far off it can be.
  • When a luminaire is close to a wall or the floor, or when IESDesk cannot confirm the figures, the scene still shows, with a note that says so.

Version 0.28.1

Improved

  • We now get an alert within 10 minutes when files are refused often, so we can help sooner.

Version 0.28.0

Improved

  • See the 3D light distribution and a lighting scene on the same page without another upload.

Version 0.27.3

Improved

  • When a tool cannot use a file, IESDesk now counts the message that it showed, with no file name and no file content. This helps us answer your questions about a message faster.

Version 0.27.2

Fixed

  • Lighting Scenes now calculates road luminaires and other files with fine angles in Open area, Street and Room. Before, these files got the message that the scene needs more samples than the calculation limit permits.
  • Street now shows the 3D view for road luminaires.

Version 0.27.1

Fixed

  • The privacy notice now names the right number of status checks.

Version 0.27.0

Improved

  • IESDesk now keeps an encrypted copy of your data each night, in the EU, for up to 31 days.

Version 0.26.2

Fixed

  • The Download CSV button on the BUG Rating and ULOR job pages no longer fills the whole card.
  • On a phone, the Update preview button of the diagram theme editor no longer fills the whole width.

Version 0.26.1

Improved

  • The home page summary that search engines show now speaks to manufacturers who keep IES and LDT files.

Version 0.26.0

New

  • Learn explains the average, the minimum, the maximum and uniformity, and how spacing and mounting height change them.

Improved

  • Lighting Scenes shows a layout drawing for each scene before you upload a file.
  • Open area, Street, Bollards, Room, Corridor and Wall each have a page in Lighting Scenes.
  • Wall is now a Lighting Scenes scene. The old Wall Wash address opens that scene.
  • In Lighting Scenes, a corridor keeps its 3D view when the room takes a little longer to calculate.
  • A blank Wall in feet starts at 10 ft high, 3 ft from the wall and 3 ft between luminaires.
  • The home page now speaks to manufacturers who create and maintain IES and LDT files. Diagrams, ratings and report sheets come before Compare and Lighting Scenes.
  • The About list in the top menu is About IESDesk, What's new, Enterprise and Contact.

Version 0.25.0

New

  • Lighting Scenes previews your IES or LDT file in Open area, Room, Street, Bollards and Corridor. Search regular room layouts against light-level and uniformity targets. The figures show direct light only.
  • IESDesk now offers Free and Enterprise plans. Free includes 100 files per batch or job and the Minimal diagram style. Enterprise adds higher limits, branded report sheets, all diagram styles and custom themes.

Improved

  • Compare Free and branded report sheets on the Enterprise page. Open each example as a full PDF.
  • Existing accounts start on Free. Saved assets remain, and accepted jobs keep their original limits and settings.

Version 0.24.0

Improved

  • Wall Wash shows softer light on neutral surfaces. Preview six colour temperatures from 2200 K to 6500 K. Adjust viewing brightness without changing your file or calculated figures.
  • Use buttons to zoom, rotate and tilt the 3D views in IES View, LDT View, Compare and Wall Wash.

Fixed

  • IES files with a leading UTF-8 marker no longer show a false missing-version warning. Original file bytes stay unchanged.

Version 0.23.0

New

  • Compare shows a 3D view of each file, side by side. All views use one scale, so a stronger light looks bigger and brighter. Turn one view, and the others turn with it.

Improved

  • Compare draws one polar diagram for each file, and all diagrams use one scale in cd/klm.
  • The IES View and LDT View pages have two new buttons: "Wall wash of this file" and "Compare with other files". Each one takes your file along, so you do not choose it again.
  • You can drop a file onto the report logo field of your account, the sheet field of "Edit in a spreadsheet" and Send feedback.
  • IESDesk keeps no IP address and no browser details when you sign in.

Fixed

  • A file name with unusual characters no longer gives an error page when you upload it.
  • The manifest.csv and rejected_files.csv files show Turkish file names correctly in Excel.
  • In a long row, Wall Wash names the right luminaire for the figure "At the foot of the wall".

Version 0.22.0

New

  • Wall Wash: see how one luminaire, or a row of up to 20, lights a wall from the ceiling. A 3D room shows the light on the wall and the floor, with the figures and the EN 12464-1 wall uniformity.
  • Send feedback takes up to 3 screenshots or short GIF recordings, so you can show us a problem. Only the IESDesk team sees them, and IESDesk deletes them after 30 days.

Improved

  • Your account is better protected: a sign-in ends after 30 days without a visit, you confirm your email address with your password on the page that the email link opens, and a password reset signs you out on every device. IESDesk asks for your password before it closes an account.

Fixed

  • Compare shows each file with the angles it stores. One luminaire can look turned by 90° from one file to another, and a note on the page tells you why.
  • Redraw on the IES View, LDT View and Diagram pages works for files above 3 MB.

Version 0.21.0

New

  • Compare keeps each comparison in Your files when you are signed in. The files stay 30 days, and the names and figures stay after that.
  • The top menu has an About list with About IESDesk, What's new and Contact.

Improved

  • The home page, the Features page and the About page name every tool, Compare and the UGR Table included.

Version 0.20.0

New

  • Compare shows 2 or 3 IES or LDT files side by side, with a table of figures and two polar diagrams on one scale. IESDesk keeps no copy of the files.
  • Compare warns you when an IES file may face another direction than the other files. It also shows the field angle next to the beam angle.
  • The What's new page lists every release of IESDesk, newest first.

Improved

  • You can drop a file on each one-file tool: IES View, LDT View, Diagrams, Report sheets, ULOR, BUG Rating and UGR Table. Compare takes 2 or 3 dropped files. A warning tells you why a drop is refused.
  • When you are signed in, the home page still shows, with a "Your files" button.
  • The export check is faster: 500 edited files take 5 seconds, not 7.

Version 0.19.0

Improved

  • The examples on the Diagrams page and the Features page also show the beam look of the cone diagram.

Version 0.18.0

Improved

  • The dark theme is easier to read in the edit grid, the dialogs, the 3D view, Your files and the Learn pages.
  • The error pages follow your choice of the light or the dark theme.
  • The Account page shows your account and your report sheet branding. The other account links are in the top menu.
  • On a phone, the result tables of ULOR, BUG Rating and Report sheets jobs scroll sideways, so each row stays short.

Fixed

  • The 3D view keeps drawing on a busy phone that scrolls while the page loads.
  • A limit of one now reads "1 file" and "1 job", not "1 files" and "1 jobs".

Version 0.17.0

New

  • One top menu on every page holds Features, Tools, Learn and, after you sign in, Your files.
  • A switch in the top menu changes the theme to light or dark. The browser keeps your choice.
  • Your files lists every batch and every job in one place, newest first, with the next step on each row. It is the first page after you sign in.
  • One Edit upload takes IES and LDT files in one drop and makes one batch for each format. The Diagrams upload does the same.
  • The public Edit pages for IES and LDT files explain bulk editing before you sign up.
  • The Diagrams page shows one small example of each diagram.
  • The UGR Table warns you when a luminaire is symmetric in one direction only.

Improved

  • Each tool has one name in the top menu, the page headings and the browser tabs.
  • IES View and LDT View each open both formats.
  • On Report sheets, you choose the sheet type: Area and road, Floodlight or Indoor. A sample sheet of each type opens in one click.
  • The beam look of the cone diagram draws beams up to 60 degrees, not 45.
  • The "Made with IESDesk" line on a report sheet links to iesdesk.com.

Fixed

  • IESDesk refuses a file with an impossible candela value or angle, and tells you why. Before, some pages showed an error page.
  • The Learn pages cite the correct sections of CIE 121 for the length of an LDT luminaire.

Version 0.16.0

New

  • The cone diagram has a beam look for spotlights. It shows the beam from the side, with each value in metres and feet. Choose it with "Cone look" on IES View, LDT View and Diagrams.

Fixed

  • The UGR Table refuses a damaged file with a clear message. Before, some damaged files gave a wrong table.

Version 0.15.0

New

  • The UGR Table shows the standard UGR table of one IES or LDT file, by the CIE 117 tabular method. IESDesk keeps no copy of the file.
  • IES View and LDT View show a Summary card. It gives the light output, the power, the efficacy, the peak intensity, the light-emitting area and the symmetry.

Version 0.13.0

New

  • Report sheets makes a one-page PDF report sheet for one IES or LDT file, in A4 or Letter. IESDesk keeps no copy of the file.
  • With a free account, you make report sheets for up to 100 files in one job. You get one ZIP file, and an email when it is ready.
  • Your logo, your name and a footer line can go on your report sheets. Add them on the Account page.
  • A batch makes report sheets from your edited files.
  • IES View and LDT View show the light in 3D. Real light shows the lit floor, and False colour shows the strength of the light. Point at a direction to read its candela value.
  • A diagram job can send you an email when the diagrams are ready.
  • The Features page explains each feature and links to each tool.

Improved

  • Learn in the top menu opens a list of every guide, and each guide lists its sections.

Version 0.12.1

Improved

  • On a phone, the list of sections of the privacy notice and the terms is easier to use.

Version 0.12.0

New

  • Diagrams draws the polar, Cartesian, cone and isolux diagrams of one IES or LDT file. IESDesk keeps no copy of the file.
  • Each one-file tool shows how to do the same work for many files with a free account.
  • The privacy notice and the terms list their sections, so you can go straight to one.

Improved

  • The top menu lists the free tools.
  • The text pages have less empty space between headings and text.

Version 0.11.0

Improved

  • The Learn pages read as one article, with less empty space between chapters.
  • The About, Contact, privacy and terms pages keep their text in one column with a comfortable line length.
  • The footer links to Emre Güneş on LinkedIn.

Version 0.10.0

Improved

  • Every public page gets a new top menu and footer. On a phone or a tablet, the menu opens in a side panel.
  • The privacy notice names our new uptime monitor.

Version 0.9.1

Improved

Version 0.9.0

New

  • A new home page shows what is free with and without an account, with a real polar diagram and a form for product news.

Improved

  • Each error page says what happened and gives one next step and our contact address.

Version 0.8.0

New

  • IESDesk publishes its privacy notice and its terms.
  • The diagram theme editor explains each field. A numbered key shows which part of the diagram a field changes, and the preview draws again after each change.
  • The theme editor shows each diagram on its own tab, and "Save as new theme" makes a copy of a theme.
  • A link to IESDesk on LinkedIn, X or a chat app shows a large preview picture.

Fixed

  • Edit no longer offers to add an IES [MORE] line to a file that has none.

Version 0.7.0

New

  • The About page tells who built IESDesk, and why.
  • Each bulk upload takes a folder and its subfolders. Before the upload starts, a warning names each file that it leaves out.

Improved

  • A diagram job that skipped some diagrams, such as a cone for a wide light, reads "Completed" with the number of skipped diagrams.

Version 0.6.0

New

  • This is the first release of IESDesk on iesdesk.com.
  • Edit changes the metadata of hundreds of IES and LDT files at once. You download the edited files in one ZIP file.
  • You can also edit the metadata in a spreadsheet. Download it as a CSV or Excel file, change it in any program, and upload it again.
  • IES View and LDT View open one file and draw its four diagrams.
  • With a free account, Diagrams draws polar, Cartesian, cone and isolux diagrams for many files in your own theme, in one ZIP file.
  • BUG Rating and ULOR are free for one file. With a free account, each one takes up to 500 files in one job and gives you one CSV file.
  • Learn explains IES and LDT files, their fields and the diagrams.